Been working on a oil cooler/filter relocate setup for our 2019 XPT 4. Finally got it done today. Mounted under the rear drivers side seat by the battery. I did not want to mount it up high on the cage because of oil drainback when the engine is off. Its really well protected and out of the way. Has a fan to move the air and it does that really well. I am going to fab up a alum plate that will bolt on to protect it all from things flying off the tire. We only ride sand and some mountain fire roads so it should be fine. No mud. Its also done so if it does get damaged I can bypass it just by moving one hose and adding one fitting that I will carry in the rzr. This setup also increased the total oil amount by 1.4 quarts.
Also got our Cagewrx cage welded up, powdercoated and installed, rear high clearance radius rods, AA clutch kit, tuner, charge tube, intake tube, SDR doors done. Hope to go on our first ride next weekend.
Also got our Cagewrx cage welded up, powdercoated and installed, rear high clearance radius rods, AA clutch kit, tuner, charge tube, intake tube, SDR doors done. Hope to go on our first ride next weekend.